Borplastika > Swimming pools and pool technique

Swimming pools and pool technique

SWIMMING POOLS WITH SPILLWAY

Swimming pools with spillway are mostly used for hotels, recreation centers and public baths. Because of the excellent quality of clean water they can be recommended for personal use.

SWIMMING POOLS WITH SKIMMER

Swimming pools with skimmer are most often used for personal purpose because of the small engine room.

WHIRLPOOL

Whirlpools are mostly used as massage baths and have a large assortment of fittings.

STANDARD SWIMMING POOL MODELS

MOUNTING OF SWIMMING POOLS

When swimming pool is going to be set up on the place of embedding (swimming pool large than 6,0 x 3,0 x 1,5 m1) it is necessary to make flat surface for its assemble For buried type of swimming pool, it is necessary that upper edge of the pool to be higher than the ground level for about 10 cm. In that case rainfall from the nearby area can not enter the pool. Dimensions of the scoop should be 20 – 25 cm wider than the pool. For pools large than 6,0 x 3,0 x 1,5 m1, and there is no flat surface for its assemble nearby, the scoop should be min. 60 – 75 cm. wider than the pool. The bearing foundation board 15-20 cm. thick, has to be absolutely horizontal and even. For concreting sides of the pool, it is not necessary to make shell. Concreting is performing by filling the pool with water in layers of 25-30 cm. After each layer of water there is going layer of concrete and so on.